.png)
Solar Panel Cleaning Melbourne
If you have solar panels on your roof, keeping them clean is one of the most effective things you can do to protect your investment. Solar panel cleaning in Melbourne is not just about appearances. Dirt, dust, bird droppings, and pollen can silently reduce your system's energy output by up to 25%, costing you money every single day without you noticing.
At Amazon Energy, we have been helping Melbourne homeowners and businesses get the most from their solar systems since 2015. Founded by Lee Faisal with a mission to deliver honest, consultative service, our team carries out all solar panel cleaning using CEC-approved, A-grade electricians, not general cleaners or subcontractors. We are a 100% Australian-owned company and a New Energy Tech Consumer Code (NETCC) Approved Seller, authorised by the ACCC.
Why solar panel cleaning in Melbourne matters
Solar panels work by converting sunlight into electricity. Any layer of grime sitting on the glass blocks that sunlight before it reaches the photovoltaic cells. Even a thin film of dust or a few bird droppings can create a "hot spot", an uneven temperature zone that reduces output and, over time, can permanently damage the cells.
1 Dirty Solar Panels
it can lose up to 25% of their energy output
2 Bird Droppings
are one of the most damaging contaminants due to their high acidity
3 Tap Water
leaves mineral deposits on panel glass that attract more dirt over time
4 Self Generation
matters more than ever as feed-in tariffs are declining across Australia
5 Aiko and Sunpower Panels
are Tier 1 manufacturers that we supply, require maintenance record to honour perfromance warranties
Melbourne's climate and your solar panels
Melbourne's unpredictable weather creates specific challenges for solar owners throughout the year:
Summer (Dec–Feb)
Dust storms from the north and dry spells bake a thick
layer of fine dust onto panels. This is the worst season for
output loss.
Autumn (Mar–May)
Leaf matter, pollen, and organic debris from deciduous
trees build up on panels and trap moisture in frames.
Winter (Jun–Aug)
Shorter days reduce available sunlight. Dirty panels
compound this. Lichen and moss can form on shaded
panel edges.
Spring (Sep–Nov)
High pollen periods coat panels in a fine yellow film that
significantly reduces light absorption.
Bayside and coastal suburbs face additional salt deposits from sea spray. Homes near roads or industrial areas accumulate grime faster. We service all Melbourne metro areas and surrounding suburbs from our Cranbourne West base.
Benefits of professional solar panel cleaning
Recover lost output
A professional clean can restore up to 25% of lost energy generation, directly reducing your electricity
bills.
Maximise your ROI
You paid significantly for your solar system. Cleaning ensures every dollar of that investment keeps working
Protect your warranty
Manufacturers require documented maintenance. Our written service report gives you that proof every time.
Spot issues early
Our technicians inspect every panel during the clean, catching cracks or wiring issues before they escalate.
Extend panel lifespan
Built-up grime causes micro-damage over years. Regular cleaning adds productive years to your system.
Environmentally responsible
We use deionised water and biodegradable agents keeping your clean energy system truly clean.
How our solar panel cleaning process works
We follow a structured, safety-first process on every job. Here is exactly what to expect:
1. Book your free assessment
Call 03 7045 5322 or visit amazonenergy.com.au. We confirm panel count, roof type, and access to give you an accurate, no-obligation quote.
2. On-site safety setup
Our CEC-accredited technicians assess roof pitch, identify hazards, and secure all ladders and harnesses fully compliant with WorkSafe Victoria standards.
3. Pre-clean inspection
We photograph and inspect every panel for physical damage, bird nesting, shading issues, or wiring concerns before touching anything.
4. Professional soft wash
Deionised, purified water and soft brushes designed specifically for solar glass. No abrasives, no harsh chemicals, only the global professional standard.
5. Frame and edge cleaning
Dirt and organic matter accumulates most along panel frames and mounting rails. We clean these
thoroughly to prevent corrosion, water pooling, and pest nesting.
6. Post-clean check and written report
Final walkthrough, after photos, and a written service report emailed to you. Any issues are clearly explained with honest advice, no pressure.
What is included in every clean
• Full deionised water rinse and soft-brush wash of all panel surfaces
• Frame and mounting rail cleaning
• Before and after photos provided via email
• Visual inspection of all panels for damage or degradation
• Bird-proofing advice if nesting is detected
• Written service report for your warranty records
Optional add-ons
• Bird-proofing installation — mesh guards installed in the same visit, very common in Melbourne suburbs
• Solar performance health check — deeper review of inverter output; we service Fronius, SolarEdge,
and Sungrow inverters
• Energy management review — free network tariff analysis available to all Amazon Energy service
customers
How often should you clean?
Most Melbourne homes benefit from 2 to 4 cleans per year. Near roads or
industrial areas: every 2–3 months. Standard suburban: every 3–4 months. Bayside/coastal: every 2–3 months. High-pollen or bushland areas: at least 3 times per year.
Why choose Amazon Energy for solar panel cleaning in Melbourne
CEC-approved A-grade electricians
All work done by qualified professionals, not general
cleaners or subcontractors.
100% Australian-owned since 2015
Founded by Lee Faisal with a mission to do things differently assuring quality workmanship and lasting relationships.
Transparent written reporting
Before and after photos plus a written service report every time. No shortcuts.
NETCC Approved Seller
Authorised by the ACCC, you are protected by peak industry consumer standards from the first interaction.
Full solar specialists
We install Aiko and SunPower panels, Fronius, SolarEdge, and Sungrow inverters, and Tesla Powerwall 3.
So cleaning is never isolated from
system health.
Genuine post-service support
Call 03 7045 5322 or email
contact@amazonenergy.com.au
What is included in every clean
01.
My panels look clean from the ground. Do I still need cleaning?
Yes, this is the most common misconception. A thin film of dust is virtually invisible from the ground but can cut output by 10–15%. Compare your current generation data with your original system projections in your inverter app to see the real picture.
02.
Can I just use a garden hose?
Tap water leaves mineral deposits on panel glass when it dries, attracting more dirt and reducing transparency. High-pressure hoses can damage panel seals. And climbing on a wet roof without safety equipment is genuinely dangerous and not worth the risk.
03.
Birds are nesting under my panels
Very common in Melbourne suburbs. Bird droppings are highly acidic and among the most damaging contaminants for solar glass. We offer bird mesh installation during the same visit to prevent re-nesting.
04.
I am not sure if my system is performing properly
Every clean includes a basic visual inspection. Our optional performance health check reviews inverter output data in detail. As a full-service solar company, we can diagnose, fix issues, and not just clean around them.
Frequently asked questions
01.
How long does a solar panel clean take?
A standard 10–20 panel residential system typically takes 1 to 2 hours including setup, inspection, cleaning, and reporting. Larger or harder-to-access roofs may take longer.
02.
Will cleaning void my panel warranty?
No, the opposite is true. Most Tier 1 manufacturers require evidence of regular professional maintenance to keep performance warranties valid. Our written service report is your proof.
03.
Do I need to be home during the cleaning?
Not necessarily. As long as we have safe roof access, you do not need to be present. We email your before-and-after photos and service report once the job is done.
04.
What if you find a problem during the clean?
We document it with photos in your service report and explain it clearly. As a full-service solar company, we can also diagnose and quote on repairs from panel replacements to inverter faults.